Your browser does not support JavaScript! PRISMASOL BGK0/2.5 (CALCIUM CHLORIDE, MAGNESIUM CHLORIDE, DEXTROSE MONOHYDRATE, LACTIC ACID, SODIUM CHLORIDE, AND SODIUM BICARBONATE) SOLUTION PRISMASOL BGK4/2.5 (CALCIUM CHLORIDE, MAGNESIUM CHLORIDE, DEXTROSE MONOHYDRATE, LACTIC ACID, SODIUM CHLORIDE, SODIUM BICARBONATE, AND POTASSIUM CHLORIDE) SOLUTION PRISMASOL BGK2/3.5 (CALCIUM CHLORIDE, MAGNESIUM CHLORIDE, DEXTROSE MONOHYDRATE, LACTIC ACID, SODIUM CHLORIDE, SODIUM BICARBONATE, AND POTASSIUM CHLORIDE) SOLUTION PRISMASOL BGK2/0 (MAGNESIUM CHLORIDE, DEXTROSE MONOHYDRATE, LACTIC ACID, SODIUM CHLORIDE, SODIUM BICARBONATE, AND POTASSIUM CHLORIDE) SOLUTION PRISMASOL B22GK4/0 (MAGNESIUM CHLORIDE, DEXTROSE MONOHYDRATE, LACTIC ACID, SODIUM CHLORIDE, SODIUM BICARBONATE, AND POTASSIUM CHLORIDE) SOLUTION PRISMASOL BK0/0/1.2 (MAGNESIUM CHLORIDE, LACTIC ACID, SODIUM CHLORIDE, AND SODIUM BICARBONATE) SOLUTION PRISMASOL BGK4/0/1.2 (MAGNESIUM CHLORIDE, DEXTROSE MONOHYDRATE, LACTIC ACID, SODIUM CHLORIDE, SODIUM BICARBONATE, AND POTASSIUM CHLORIDE) SOLUTION [GAMBRO RENAL PRODUCTS]
DailyMed Logo Header image

Daily Med

Current Medication Information

Options

RxNorm Names

Out of scope

PRISMASOL BGK0/2.5 (calcium chloride, magnesium chloride, dextrose monohydrate, lactic acid, sodium chloride, and sodium bicarbonate) solution
PRISMASOL BGK4/2.5 (calcium chloride, magnesium chloride, dextrose monohydrate, lactic acid, sodium chloride, sodium bicarbonate, and potassium chloride) solution
PRISMASOL BGK2/3.5 (calcium chloride, magnesium chloride, dextrose monohydrate, lactic acid, sodium chloride, sodium bicarbonate, and potassium chloride) solution
PRISMASOL BGK2/0 (magnesium chloride, dextrose monohydrate, lactic acid, sodium chloride, sodium bicarbonate, and potassium chloride) solution
PRISMASOL B22GK4/0 (magnesium chloride, dextrose monohydrate, lactic acid, sodium chloride, sodium bicarbonate, and potassium chloride) solution
PRISMASOL BK0/0/1.2 (magnesium chloride, lactic acid, sodium chloride, and sodium bicarbonate) solution
PRISMASOL BGK4/0/1.2 (magnesium chloride, dextrose monohydrate, lactic acid, sodium chloride, sodium bicarbonate, and potassium chloride) solution
[Gambro Renal Products]


Category DEA Schedule Marketing Status
HUMAN PRESCRIPTION DRUG LABEL New Drug Application
Drug Label Sections

HIGHLIGHTS OF PRESCRIBING INFORMATION

These highlights do not include all the information needed to use PrismaSol solution safely and effectively. See full prescribing information for PrismaSol solution.

PrismaSol® solution, for intravenous administration.
Initial U.S. Approval: 2006

INDICATIONS AND USAGE

PrismaSol solution is indicated: (1)

  • As a replacement solution in Continuous Renal Replacement Therapy (CRRT)
  • In case of drug poisoning when CRRT is used

DOSAGE AND ADMINISTRATION

The mode of therapy, solute formulations, flow rates and length of therapy should be selected by the physician responsible for managing treatment depending on the clinical condition of the patient as well as the patient's fluid, electrolyte, acid base and glucose balance. (2)

DOSAGE FORMS AND STRENGTHS

1000 mL of the reconstituted PrismaSol solution contains (in mEq/L except where noted): (3)

BGK 0/2.5BGK 4/2.5BGK 2/3.5BGK 2/0
Ca2+2.52.53.50
HCO3-32323232
K+04.02.02.0
Mg2+1.51.51.01.0
Na+140140140140
Cl-109.0113.0111.5108.0
Lactate3.03.03.03.0
Dextrose100 mg/dL100 mg/dL100 mg/dL100 mg/dL
B22GK 4/0BK 0/0/1.2BGK 4/0/1.2
Ca2+000
HCO3-223232
K+4.004.0
Mg2+1.51.21.2
Na+140140140
Cl-120.5106.2110.2
Lactate3.03.03.0
Dextrose100 mg/dL0100 mg/dL

CONTRAINDICATIONS

None (4)

WARNINGS AND PRECAUTIONS

  • The solution in compartment A must be mixed with the solution of compartment B before use. Due to chemical reasons, after removal of the overwrap, the solution is stable for 24 hours including the duration of the treatment.
  • Do not administer the reconstituted solution unless it is clear and free of visible particulate matter.
  • The patient's hemodynamic fluid, electrolyte and acid-base balance should be monitored throughout the procedure. Abnormalities in the plasma concentration of potassium, calcium, and glucose may be corrected by the use of appropriate formulations of PrismaSol solution.
  • Use only with continuous extra-corporeal blood purification equipment in CRRT.
  • The solution may be heated to no more than 40°C/104°F inside of the overwrap and this must be carefully controlled.

ADVERSE REACTIONS

Improper use can lead to fluid imbalance and disturbances in electrolyte, acid-base and glucose balance. (6)


To report SUSPECTED ADVERSE REACTIONS, contact Gambro at 1800-651-2623 / www.gambro.com or FDA 1-800-FDA-1088 or www.fda.gov/medwatch (6)

Revised: 1/2014

FULL PRESCRIBING INFORMATION

1 INDICATION AND USAGE

PrismaSol solution is indicated in adults and children for use as a replacement solution in Continuous Renal Replacement Therapy (CRRT) to replace plasma volume removed by ultrafiltration and to correct electrolytes and acid-base imbalances. PrismaSol solution may also be used in case of drug poisoning when CRRT is used to remove filterable substances.

2 DOSAGE AND ADMINISTRATION

2.1 Individualization of Treatments

The mode of therapy, solute formulation, flow rates and length of therapy should be selected by the physician responsible for managing treatment depending on the clinical condition of the patient as well as the patient's fluid, electrolyte, acid base and glucose balance. PrismaSol solution can be administered into the extra-corporeal circuit before (pre-dilution) and/or after the hemofilter or hemodiafilter (post-dilution).

In post-dilution hemofiltration, the replacement rate should not be greater than one third of the blood flow rate; e.g., for blood flow of 100 mL/min, equivalent to 6000 mL/hour, post-filter replacement rate should not exceed 2000 mL/hour.

2.2 Directions for use

PrismaSol solution should be inspected visually for particulate matter and discoloration prior to administration. Use only if the solution is clear and all seals, including the peel seal between the compartments, are intact. Press bag firmly to test for any leakage. Do not use if container is damaged or leaking.

When connecting solution bags, follow the instructions in this leaflet for correct use of the access ports. Incorrect use of the access port or other restrictions to fluid flow might lead to incorrect patient weight loss and may result in machine alarms. Continuing treatment without resolving the originating cause may result in patient injury or death.

The electrolyte solution (small compartment A) is added to the buffer solution (large compartment B) by opening the peel seal immediately before use and mixing the contents of compartments A and B.

Figure

  • The reconstituted solution is for single patient use only
  • Aseptic technique should be used throughout administration to the patient.
  • Discard any unused solution.

As soon as the overwrap is removed, the reconstitution of compartments A and B should be done and the reconstituted solution should be used immediately.

Due to chemical reasons, after removal of the overwrap, the solution is stable for 24 hours including the duration of the treatment.

Figure 1
 
Step 1 Immediately before use, remove the overwrap from the bag and mix the solutions in the two different compartments. Hold the small compartment with both hands and squeeze it until an opening is created in the peel seal. (See Figure 1 beside)
Figure 2Step 2 Squeeze with both hands on the large compartment until the peel seal between the two compartments is entirely open. Shake gently to mix. (See Figure 2 beside)

The solution is now ready for use and can be hung on the equipment.

Step 3 The replacement line may be connected to the bag through either of the luer connector or the injection connector (or spike connector).

Figure 3a
 
Step 3a The luer connector is a needle-less and swabbable connector. Remove the cap with a twist and pull motion, and connect the male luer lock on the replacement line to the female luer receptor on the bag. (See Figure 3a beside)

Ensure that the connection is fully seated and tighten. The connector is now open. Verify that the fluid is flowing freely during use.

When the replacement line is disconnected from the luer connector, the connector will close and the flow of the solution will stop.
Figure 3bStep 3b If the injection connector (or spike connector) is used, first remove the snap-off cap. Then introduce the replacement line spike through the rubber septum of the bag connector. (See Figure 3b beside)

Ensure that the spike is fully inserted and verify that the fluid is flowing freely during use.

Additions: The large compartment B is fitted with an injection connector (or spike connector) for the addition of drugs after reconstitution of the solution. When introducing additives, use aseptic techniques.

Phosphate: Phosphate up to 1.2 mmol/L may be added to the solution. If potassium phosphate is added, the total potassium concentration should not exceed 4 mEq/L.

Other drugs: Some drugs may be incompatible with PrismaSol solution. In general, other drugs should be administered through a different line.

3 DOSAGE FORMS AND STRENGTHS

PrismaSol Solutions
BGK0/2.5BGK4/2.5BGK2/3.5BGK2/0B22GK4/0BK0/0/1.2BGK4/0/1.2

Each PrismaSol solution represents of a unique combination of the active ingredients listed below.

BEFORE RECONSTITUTION

1000 mL of clear electrolyte solution (small compartment A) contains (g):

Active ingredientsPrismaSol
BGK 0/2.5
PrismaSol
BGK 4/2.5
PrismaSol
BGK 2/3.5
PrismaSol
BGK 2/0
PrismaSol
B22GK 4/0
PrismaSol
BK 0/0/1.2
PrismaSol
BGK 4/0/1.2
Calcium chloride • 2 H2O3.683.685.150000
Magnesium chloride • 6 H2O3.053.052.032.033.052.442.44
Dextrose anhydrous20.020.020.020.020.0020.0
(as dextrose monohydrate)22.022.022.022.022.0022.0
Lactic acid5.405.405.405.405.405.405.40

1000 mL of buffer solution (large compartment B) contains (g):

Active ingredientsPrismaSol
BGK 0/2.5
PrismaSol
BGK 4/2.5
PrismaSol
BGK 2/3.5
PrismaSol
BGK 2/0
PrismaSol
B22GK 4/0
PrismaSol
BK 0/0/1.2
PrismaSol
BGK 4/0/1.2
Sodium chloride6.466.466.466.467.076.466.46
Sodium bicarbonate3.093.093.093.092.213.093.09
Potassium chloride00.3140.1570.1570.31400.314

AFTER RECONSTITUTION OF COMPARTMENTS A AND B

1000 mL of the clear reconstituted solution contains:

in mEq/L except where notedPrismaSol
BGK 0/2.5
PrismaSol
BGK 4/2.5
PrismaSol
BGK 2/3.5
PrismaSol
BGK 2/0
PrismaSol
B22GK 4/0
PrismaSol
BK 0/0/1.2
PrismaSol
BGK 4/0/1.2
Calcium, Ca2+2.52.53.50000
Bicarbonate, HCO3-32323232223232
Potassium, K+04.02.02.04.004.0
Magnesium, Mg2+1.51.51.01.01.51.21.2
Sodium, Na+140140140140140140140
Chloride, Cl-109.0113.0111.5108.0120.5106.2110.2
Lactate3.03.03.03.03.03.03.0
Dextrose100 mg/dL100 mg/dL100 mg/dL100 mg/dL100 mg/dL0100 mg/dL
Theoretical Osmolarity292
mOsm/L
300
mOsm/L
296
mOsm/L
291
mOsm/L
296
mOsm/L
282
mOsm/L
295
mOsm/L

4 CONTRAINDICATIONS

There is no known contraindication to the use of PrismaSol solution.

5 WARNINGS AND PRECAUTIONS

The electrolyte solution contained in compartment A must be mixed with the buffer solution of compartment B before use in order to obtain the reconstituted solution suitable for hemofiltration /hemodiafiltration.

Due to chemical reasons, after removal of the overwrap, the solution is stable for 24 hours including the duration of the treatment.

Do not administer the reconstituted solution unless it is clear and free of visible particulate matter.

PrismaSol solution includes several formulations. Selection of a specific formulation depends on the patient's condition and treatment procedures.

Administration of the solution should only be under the direction of a physician competent in intensive care treatment including CRRT.

The patient's hemodynamic fluid, electrolyte and acid-base balance should be monitored throughout the procedure. Note that citrate, when used as an anticoagulant, contributes to the base load and can reduce plasma calcium levels.

During hemofiltration or hemodiafiltration, abnormalities in the plasma concentration of potassium, calcium, and glucose may develop. These abnormalities may be corrected by the use of appropriate formulations of PrismaSol solution. Abnormalities in plasma phosphate concentration, especially hypophosphatemia, may also occur. Hypophosphatemia may require phosphate supplementation to maintain plasma concentrations in the physiologic range.

Use only with continuous extra-corporeal blood purification equipment in CRRT.

When connecting solution bags, follow the instructions in this leaflet for correct use of the access ports. Incorrect use of the access port or other restrictions to fluid flow might lead to incorrect patient weight loss and may result in machine alarms. Continuing treatment without resolving the originating cause may result in patient injury or death.

The solution may be heated to no more than 40°C/104°F inside of the overwrap and this must be carefully controlled. After heating, verify that the solution remains clear and contains no particulate matter.

Diabetes Mellitus or Glucose Intolerance

Patients may require initiation of insulin therapy or modification of insulin dosage during treatment with PrismaSol solution. Appropriate monitoring of blood glucose should be performed and insulin dosage adjusted accordingly.

6 ADVERSE REACTIONS

Adverse reactions can result from the solution or the CRRT procedure.

Improper use can lead to fluid imbalance and disturbances in electrolyte, acid-base and glucose balance.

7 DRUG INTERACTIONS

As with the use of other replacement solutions, blood concentrations of filterable drugs may be influenced by CRRT.

The blood concentrations of certain drugs may need to be monitored and appropriate therapy implemented to correct for removal during treatment. In patients with cardiovascular disease, especially those using cardiac glycoside medications, plasma levels of calcium, potassium and magnesium must be carefully monitored.

8 USE IN SPECIFIC POPULATION

8.1 Pregnancy

Pregnancy Category C.

PrismaSol solution is a replacement solution of electrolytes, bicarbonate and dextrose and is pharmacologically inactive. Animal reproduction studies have not been conducted with PrismaSol solution. While there are no adequate and well controlled studies in pregnant women, appropriate administration of PrismaSol solution with monitoring of fluid, electrolyte, acid-base and glucose balance, is not expected to cause fetal harm, or affect reproductive capacity. Maintenance of normal acid-base balance is important for fetal well being.

8.3 Nursing Mothers

PrismaSol solution is a replacement solution of electrolytes, bicarbonate and dextrose and is pharmacologically inactive. The components of PrismaSol solution are excreted in human milk. Appropriate administration of PrismaSol solution with monitoring of fluid, electrolyte, acid-base and glucose balance, is not expected to harm a nursing infant.

8.4 Pediatric

Safety and effectiveness have been established based on published clinical data of CCRT replacement solutions used in adults and children. Two hemofiltration studies have shown that CRRT can be used to treat pediatric patients, including a study of newborns to 17 years olds. These pediatric studies utilized replacement solutions with a composition similar to PrismaSol Solutions. No adequate and well-controlled studies have been conducted with PrismaSol Solutions in pediatric patients.

8.5 Geriatric

Safety and effectiveness in geriatric patients have been reported in some studies on the general population. No formal specific study was carried out in the geriatric population.

Although clinical experience has not identified differences in responses between elderly and younger patients, greater sensitivity of some individuals cannot be ruled out.

10 OVERDOSAGE

Overdosage with PrismaSol solution should not occur if the procedure is carried out appropriately with careful monitoring of fluid, electrolyte, acid-base and glucose balance. However, overdosage can occur if fluid administration is in excess of the volume required to achieve the prescribed fluid balance or if delivery of a solute component in the solution exceeds a patient's needs. On the other hand, excessive fluid and solute removal may also occur in CRRT, potentially resulting in volume depletion and solute deficits.

The management of either an excess or deficiency state with respect to fluid, electrolyte and acid-base balance may involve modifications in the rate of administration and/or the composition of CRRT solutions. In conjunction with these changes, adjustments in the effluent (dialysate or ultrafiltrate) rate may need to occur.

11 DESCRIPTION

PrismaSol solution is a clear, sterile solution free of bacterial endotoxins. This solution is used in Continuous Renal Replacement Therapies (CRRT) as a replacement solution in hemofiltration and hemodiafiltration.

It contains no bacteriostatic or antimicrobial agents.

PrismaSol solution is packaged in a two-compartment bag. The small compartment A contains electrolytes and the large compartment B contains buffer. The final reconstituted solution (5000 mL) is obtained after breaking the peel seal between compartment A and B and mixing both solutions.

Calcium chloride, USP, is chemically designated calcium chloride dihydrate (CaCl2 • 2 H2O).
Magnesium chloride, USP, is chemically designated magnesium chloride hexahydrate (MgCl2 • 6 H2O).
Dextrose, USP, is chemically designated D-Glucose anhydrous (C6H12O6) or D-Glucose monohydrate (C6H12O6 • H2O).
Lactic acid, USP, is chemically designated CH3CH(OH)COOH.
Sodium chloride, USP, is chemically designated NaCl.
Potassium chloride, USP, is chemically designated KCl.
Sodium bicarbonate, USP, is chemically designated NaHCO3.

The pH of the final solution is in the range of 7.0 to 8.5.

12 CLINICAL PHARMACOLOGY

12.1 Mechanism of Action

PrismaSol solution is a pharmacologically inactive solution. The electrolyte concentrations in the PrismaSol solutions are chosen to restore plasma levels to clinically desired concentrations or maintain plasma levels at the desired concentrations.

PrismaSol solution is used as replacement solution to replace water and electrolytes removed during hemofiltration and hemodiafiltration. Bicarbonate in the solution is used as an alkalinizing buffer to normalize acid-base balance.Lactate is used for the adjustment of the solution pH and is metabolized to bicarbonate.

When dextrose is present, it is intended to help normalize glucose balance.

12.2 Pharmacokinetics

The distribution of electrolytes, bicarbonate and dextrose is determined by the patient's clinical condition, metabolic status, and residual renal function.

The elimination and replacement of water, electrolytes and buffer depend on the patient's electrolyte and acid-base balance, metabolic status, residual renal function and ongoing physiologic losses through intestinal, respiratory and cutaneous routes.

16 HOW SUPPLIED STORAGE AND HANDLING

PrismaSol solution is supplied in a two compartment bag made of polyolefin. Polyolefin does not contain the chemical component di-2-ethyl hexyl phthalate (DEHP).

The 5000 mL bag is composed of a small compartment (250 mL) and a large compartment (4750 mL). The two compartments are separated by a peel seal.

The bag is overwrapped with a transparent overwrap.

ContainerFill VolumeNDC
PrismaSol BGK0/2.55000 mL24571-108-06
PrismaSol BGK4/2.55000 mL24571-105-06
PrismaSol BGK2/3.55000 mL24571-103-06
PrismaSol BGK2/05000 mL24571-102-06
PrismaSol B22GK4/05000 mL24571-111-06
PrismaSol BK0/0/1.25000 mL24571-113-06
PrismaSol BGK4/0/1.25000 mL24571-114-06

Not all formulations may be marketed.

Storage conditions

Store at 20°C to 25°C (68°F to 77°F); excursions permitted to 15°-30°C (59°-86°F). [See USP Controlled Room Temperature]

Do not freeze or expose to excessive heat. Do not use if precipitate has formed or if container seals have been damaged.

Manufactured by:
Gambro Renal Products, Inc
1845 Mason Avenue
Daytona Beach, FL 32117, USA

PRINCIPAL DISPLAY PANEL - BGK0/2.5 Bag Label

NDC# 24571-108-06

0K+
mEq/L

2.5Ca2+
mEq/L

PrismaSol® BGK0/2.5
Replacement Solution for Continuous Renal Replacement Therapy

Rx only

A
250 mL

B
4750 mL

Before reconstitution each 1000 mL contains (g)AB
Calcium chloride • 2 H2O3.68
Magnesium chloride • 6 H2O3.05
Dextrose anhydrous20.0
(as dextrose monohydrate)22.0
Sodium chloride6.46
Lactic acid5.40
Sodium bicarbonate3.09
Water for injections qs, Carbon dioxide for pH adjustment
After reconstitution, A + B
Calcium
Ca2+
Magnesium
Mg2+
Sodium
Na+
Chloride
Cl-
Lactate
C3H5O3-
Bicarbonate
HCO3-
Potassium
K+
Dextrose
mmol/L1.250.75140109.03.03205.5
mEq/L2.51.5140109.03.0320(100mg/dL)
Theoretical osmolarity: 292 mOsm/LpH: 7.0 – 8.5

Mix both compartments before use.
See package insert for dosage information and
further instructions.
Sterile and free from bacterial endotoxins.
Confirm the integrity of the packaging. Use only
if solution is clear. For single use only. DISCARD
ANY UNUSED SOLUTION.
Store at 20°C to 25°C (68°F to 77°F); excursions
permitted to 15°C - 30°C (59°F - 86°F). [See USP
Controlled room Temperature.]
Do not freeze or expose to excessive heat.
As soon as the overwrap is removed, the recon-
stitution of compartments A and B should be
done and the reconstituted solution should be
used immediately. After removal of the overwrap,
the solution is stable for 24 hours including the
duration of the treatment. (See insert for further
information.)
This product is latex free.

5000 mL

GAMBRO®

EAN-14: 07332414091613
Batch No. and expiry date are printed on the
back of the bag.
Manufactured by: Gambro Renal Products, Inc., 1845 Mason Avenue,
Daytona Beach, FL 32117, USA

Product No: 110240

R E P L A C E M E N T
Solution for Continuous Renal Replacement Therapy

D07200042 2012-07/1

PRINCIPAL DISPLAY PANEL - BGK0/2.5 Bag Label

PRINCIPAL DISPLAY PANEL - BGK4/2.5 Bag Label

NDC# 24571-105-06

4K+
mEq/L

2.5Ca2+
mEq/L

PrismaSol® BGK4/2.5
Replacement Solution for Continuous Renal Replacement Therapy

Rx only

A
250 mL

B
4750 mL

Before reconstitution each 1000 mL contains (g)AB
Calcium chloride • 2 H2O3.68
Magnesium chloride • 6 H2O3.05
Dextrose anhydrous20.0
(as dextrose monohydrate)22.0
Sodium chloride6.46
Potassium chloride0.314
Lactic acid5.40
Sodium bicarbonate3.09
Water for Injections qs, Carbon dioxide for pH adjustment
After reconstitution, A + B
Calcium
Ca2+
Magnesium
Mg2+
Sodium
Na+
Chloride
Cl-
Lactate
C3H5O3-
Bicarbonate
HCO3-
Potassium
K+
Dextrose
mmol/L1.250.75140113.03.0324.05.5
mEq/L2.51.5140113.03.0324.0(100 mg/dL)
Theoretical osmolarity: 300 mOsm/LpH: 7.0 – 8.5

Mix both compartments before use.
See package insert for dosage information and
further instructions.
Sterile and free from bacterial endotoxins.
Confirm the integrity of the packaging. Use only
if solution is clear. For single use only. DISCARD
ANY UNUSED SOLUTION.
Store at 20°C to 25°C (68°F to 77°F); excursions
permitted to 15°C - 30°C (59°F - 86°F). [See USP
Controlled room Temperature.]
Do not freeze or expose to excessive heat.
As soon as the overwrap is removed, the recon-
stitution of compartments A and B should be
done and the reconstituted solution should be
used immediately. After removal of the overwrap,
the solution is stable for 24 hours including the
duration of the treatment. (See insert for further
information.)
This product is latex free.

5000 mL

GAMBRO®

EAN-14: 07332414091637
Batch No. and expiry date are printed on the
back of the bag.
Manufactured by: Gambro Renal Products, Inc., 1845 Mason Avenue,
Daytona Beach, FL 32117, USA

Product No: 110242

R E P L A C E M E N T
Solution for Continuous Renal Replacement Therapy

D07200037 2012-07/01

PRINCIPAL DISPLAY PANEL - BGK4/2.5 Bag Label

PRINCIPAL DISPLAY PANEL - BGK2/3.5 Bag Label

NDC# 24571-103-06

2K+
mEq/L

3.5Ca2+
mEq/L

PrismaSol® BGK2/3.5
Replacement Solution for Continuous Renal Replacement Therapy

Rx only

A
250 mL

B
4750 mL

Before reconstitution each 1000 mL contains (g)AB
Calcium chloride • 2 H2O5.15
Magnesium chloride • 6 H2O2.03
Dextrose anhydrous20.0
(as dextrose monohydrate)22.0
Sodium chloride6.46
Potassium chloride0.157
Lactic acid5.40
Sodium bicarbonate3.09
Water for injections qs, Carbon dioxide for pH adjustment
After reconstitution, A + B
Calcium
Ca2+
Magnesium
Mg2+
Sodium
Na+
Chloride
Cl-
Lactate
C3H5O3-
Bicarbonate
HCO3-
Potassium
K+
Dextrose
mmol/L1.750.5140111.53.0322.05.5
mEq/L3.51.0140111.53.0322.0(100 mg/dL)
Theoretical osmolarity: 296 mOsm/LpH: 7.0 – 8.5

Mix both compartments before use.
See package insert for dosage information and
further instructions.
Sterile and free from bacterial endotoxins.
Confirm the integrity of the packaging. Use only
if solution is clear. For single use only. DISCARD
ANY UNUSED SOLUTION.
Store at 20°C to 25°C (68°F to 77°F); excursions
permitted to 15°C - 30°C (59°F - 86°F). [See USP
Controlled room Temperature.]
Do not freeze or expose to excessive heat.
As soon as the overwrap is removed, the recon-
stitution of compartments A and B should be
done and the reconstituted solution should be
used immediately. After removal of the overwrap,
the solution is stable for 24 hours including the
duration of the treatment. (See insert for further
information.)
This product is latex free.

5000 mL

GAMBRO®

EAN-14: 07332414091644
Batch No. and expiry date are printed on the
back of the bag.
Manufactured by: Gambro Renal Products, Inc., 1845 Mason Avenue,
Daytona Beach, FL 32117, USA

Product No: 110243

R E P L A C E M E N T
Solution for Continuous Renal Replacement Therapy

D07200038 2012-07/1

PRINCIPAL DISPLAY PANEL - BGK2/3.5 Bag Label

PRINCIPAL DISPLAY PANEL - BGK2/0 Bag Label

NDC# 24571-102-06

2K+
mEq/L

0Ca2+
mEq/L

PrismaSol® BGK2/0
Replacement Solution for Continuous Renal Replacement Therapy

Rx only

A
250 mL

B
4750 mL

Before reconstitution each 1000 mL contains (g)AB
Magnesium chloride • 6 H2O2.03
Dextrose anhydrous20.0
(as dextrose monohydrate)22.0
Sodium chloride6.46
Potassium chloride0.157
Lactic acid5.40
Sodium bicarbonate3.09
Water for injections qs, Carbon dioxide for pH adjustment
After reconstitution, A + B
Calcium
Ca2+
Magnesium
Mg2+
Sodium
Na+
Chloride
Cl-
Lactate
C3H5O3-
Bicarbonate
HCO3-
Potassium
K+
Dextrose
mmol/L00.5140108.03.0322.05.5
mEq/L01.0140108.03.0322.0(100 mg/dL)
Theoretical osmolarity: 291 mOsm/LpH: 7.0 – 8.5

Mix both compartments before use.
See package insert for dosage information and
further instructions.
Sterile and free from bacterial endotoxins.
Confirm the integrity of the packaging. Use only
if solution is clear. For single use only. DISCARD
ANY UNUSED SOLUTION.
Store at 20°C to 25°C (68°F to 77°F); excursions
permitted to 15°C - 30°C (59°F - 86°F). [See USP
Controlled room Temperature.]
Do not freeze or expose to excessive heat.
As soon as the overwrap is removed, the recon-
stitution of compartments A and B should be
done and the reconstituted solution should be
used immediately. After removal of the overwrap,
the solution is stable for 24 hours including the
duration of the treatment. (See insert for further
information.)
This product is latex free.

5000 mL

GAMBRO®

EAN-14: 07332414091651
Batch No. and expiry date are printed on the
back of the bag.
Manufactured by: Gambro Renal Products, Inc., 1845 Mason Avenue,
Daytona Beach, FL 32117, USA

Product No: 110244

R E P L A C E M E N T
Solution for Continuous Renal Replacement Therapy

D07200039 2012-07/1

PRINCIPAL DISPLAY PANEL - BGK2/0 Bag Label

PRINCIPAL DISPLAY PANEL - B22GK4/0 Bag Label

NDC# 24571-111-06

4K+
mEq/L

Bicarbonate 22

0Ca2+
mEq/L

PrismaSol® B22GK4/0
Replacement Solution for Continuous Renal Replacement Therapy

Rx only

A
250 mL

B
4750 mL

Before reconstitution each 1000 mL contains (g)AB
Magnesium chloride • 6 H2O3.05
Dextrose anhydrous20.0
(as dextrose monohydrate)22.0
Sodium chloride7.07
Potassium chloride0.314
Lactic acid5.40
Sodium bicarbonate2.21
Water for injections qs, Carbon dioxide for pH adjustment
After reconstitution, A + B
Calcium
Ca2+
Magnesium
Mg2+
Sodium
Na+
Chloride
Cl-
Lactate
C3H5O3-
Bicarbonate
HCO3-
Potassium
K+
Dextrose
mmol/L00.75140120.53.0224.05.5
mEq/L01.5140120.53.0224.0(100mg/dL)
Theoretical osmolarity: 296 mOsm/LpH: 7.0 – 8.5

Mix both compartments before use.
See package insert for dosage information and
further instructions.
Sterile and free from bacterial endotoxins.
Confirm the integrity of the packaging. Use only
if solution is clear. For single use only. DISCARD
ANY UNUSED SOLUTION.
Store at 20°C to 25°C (68°F to 77°F); excursions
permitted to 15°C - 30°C (59°F - 86°F). [See USP
Controlled room Temperature.]
Do not freeze or expose to excessive heat.
As soon as the overwrap is removed, the recon-
stitution of compartments A and B should be
done and the reconstituted solution should be
used immediately. After removal of the overwrap,
the solution is stable for 24 hours including the
duration of the treatment. (See insert for further
information.)
This product is latex free.

5000 mL

GAMBRO®

EAN-14: 07332414116781
Batch No. and expiry date are printed on the
back of the bag.
Manufactured by: Gambro Renal Products, Inc., 1845 Mason Avenue,
Daytona Beach, FL 32117, USA

Product No: 115001

R E P L A C E M E N T
Solution for Continuous Renal Replacement Therapy

D11000102 2012-07/1

PRINCIPAL DISPLAY PANEL - B22GK4/0 Bag Label

PRINCIPAL DISPLAY PANEL - BK0/0/1.2 Bag Label

NDC# 24571-113-06

0K+
mEq/L

0Ca2+
mEq/L

PrismaSol® BGK0/0/1.2
Replacement Solution for Continuous Renal Replacement Therapy

Rx only

A
250 mL

B
4750 mL

Before reconstitution each 1000 mL contains (g)AB
Magnesium chloride • 6 H2O2.44
Sodium chloride6.46
Lactic acid5.40
Sodium bicarbonate3.09
Water for injections qs, Carbon dioxide for pH adjustment
After reconstitution, A + B
Calcium
Ca2+
Magnesium
Mg2+
Sodium
Na+
Chloride
Cl-
Lactate
C3H5O3-
Bicarbonate
HCO3-
Potassium
K+
Dextrose
mmol/L00.6140106.23.03200
mEq/L01.2140106.23.0320(0mg/dL)
Theoretical osmolarity: 282 mOsm/LpH: 7.0 – 8.5

Mix both compartments before use.
See package insert for dosage information and
further instructions.
Sterile and free from bacterial endotoxins.
Confirm the integrity of the packaging. Use only
if solution is clear. For single use only. DISCARD
ANY UNUSED SOLUTION.
Store at 20°C to 25°C (68°F to 77°F); excursions
permitted to 15°C - 30°C (59°F - 86°F). [See USP
Controlled room Temperature.]
Do not freeze or expose to excessive heat.
As soon as the overwrap is removed, the recon-
stitution of compartments A and B should be
done and the reconstituted solution should be
used immediately. After removal of the overwrap,
the solution is stable for 24 hours including the
duration of the treatment. (See insert for further
information.)
This product is latex free.

5000 mL

GAMBRO®

EAN-14: 07332414091309
Batch No. and expiry date are printed on the
back of the bag.
Manufactured by: Gambro Renal Products, Inc., 1845 Mason Avenue,
Daytona Beach, FL 32117, USA

Product No: 110239

R E P L A C E M E N T
Solution for Continuous Renal Replacement Therapy

D07200041 2012-07/1

PRINCIPAL DISPLAY PANEL - BK0/0/1.2 Bag Label

PRINCIPAL DISPLAY PANEL - BGK4/0/1.2 Bag Label

NDC# 24571-114-06

4K+
mEq/L

0Ca2+
mEq/L

PrismaSol® BGK4/0/1.2
Replacement Solution for Continuous Renal Replacement Therapy

Rx only

A
250 mL

B
4750 mL

Before reconstitution each 1000 mL contains (g)AB
Magnesium chloride • 6 H2O2.44
Dextrose anhydrous20.0
(as dextrose monohydrate)22.0
Sodium chloride6.46
Potassium chloride0.314
Lactic acid5.40
Sodium bicarbonate3.09
Water for injections qs, Carbon dioxide for pH adjustment
After reconstitution, A + B
Calcium
Ca2+
Magnesium
Mg2+
Sodium
Na+
Chloride
Cl-
Lactate
C3H5O3-
Bicarbonate
HCO3-
Potassium
K+
Dextrose
mmol/L00.6140110.23.0324.05.5
mEq/L01.2140110.23.0324.0(100 mg/dL)
Theoretical osmolarity: 295 mOsm/LpH: 7.0 – 8.5

Mix both compartments before use.
See package insert for dosage information and
further instructions.
Sterile and free from bacterial endotoxins.
Confirm the integrity of the packaging. Use only
if solution is clear. For single use only. DISCARD
ANY UNUSED SOLUTION.
Store at 20°C to 25°C (68°F to 77°F); excursions
permitted to 15°C - 30°C (59°F - 86°F). [See USP
Controlled room Temperature.]
Do not freeze or expose to excessive heat.
As soon as the overwrap is removed, the recon-
stitution of compartments A and B should be
done and the reconstituted solution should be
used immediately. After removal of the overwrap,
the solution is stable for 24 hours including the
duration of the treatment. (See insert for further
information.)
This product is latex free.

5000 mL

GAMBRO®

EAN-14: 07332414091620
Batch No. and expiry date are printed on the
back of the bag.
Manufactured by: Gambro Renal Products, Inc., 1845 Mason Avenue,
Daytona Beach, FL 32117, USA

Product No: 110241

R E P L A C E M E N T
Solution for Continuous Renal Replacement Therapy

D07200043 2012-07/1

PRINCIPAL DISPLAY PANEL - BGK4/0/1.2 Bag Label
PRISMASOL   BGK0/2.5
calcium chloride, magnesium chloride, dextrose monohydrate, lactic acid, sodium chloride, and sodium bicarbonate solution
Product Information
Product TypeHUMAN PRESCRIPTION DRUG LABELItem Code (Source)NDC:24571-108
Route of AdministrationINTRAVENOUSDEA Schedule    
Active Ingredient/Active Moiety
Ingredient NameBasis of StrengthStrength
Calcium Chloride (Calcium Cation and Chloride Ion) Calcium Chloride0.139 g  in 1 L
Magnesium Chloride (Magnesium Cation and Chloride Ion) Magnesium Chloride0.071 g  in 1 L
Dextrose monohydrate (Anhydrous Dextrose) Dextrose monohydrate1 g  in 1 L
Lactic Acid (Lactic Acid) Lactic Acid0.270 g  in 1 L
Sodium Chloride (Sodium Cation and Chloride Ion) Sodium Chloride6.137 g  in 1 L
Sodium Bicarbonate (Sodium Cation and Bicarbonate Ion) Sodium Bicarbonate2.936 g  in 1 L
Inactive Ingredients
Ingredient NameStrength
Water 
Carbon Dioxide 
Packaging
#Item CodePackage DescriptionMarketing Start DateMarketing End Date
1NDC:24571-108-065 L in 1 BAG
Marketing Information
Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
NDANDA02170310/25/2006
PRISMASOL   BGK4/2.5
calcium chloride, magnesium chloride, dextrose monohydrate, lactic acid, sodium chloride, sodium bicarbonate, and potassium chloride solution
Product Information
Product TypeHUMAN PRESCRIPTION DRUG LABELItem Code (Source)NDC:24571-105
Route of AdministrationINTRAVENOUSDEA Schedule    
Active Ingredient/Active Moiety
Ingredient NameBasis of StrengthStrength
Calcium Chloride (Calcium Cation and Chloride Ion) Calcium Chloride0.139 g  in 1 L
Magnesium Chloride (Magnesium Cation and Chloride Ion) Magnesium Chloride0.071 g  in 1 L
Dextrose monohydrate (Anhydrous Dextrose) Dextrose monohydrate1 g  in 1 L
Lactic Acid (Lactic Acid) Lactic Acid0.270 g  in 1 L
Sodium Chloride (Sodium Cation and Chloride Ion) Sodium Chloride6.137 g  in 1 L
Sodium Bicarbonate (Sodium Cation and Bicarbonate Ion) Sodium Bicarbonate2.936 g  in 1 L
Potassium Chloride (Potassium Cation and Chloride Ion) Potassium Chloride0.298 g  in 1 L
Inactive Ingredients
Ingredient NameStrength
Water 
Carbon Dioxide 
Packaging
#Item CodePackage DescriptionMarketing Start DateMarketing End Date
1NDC:24571-105-065 L in 1 BAG
Marketing Information
Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
NDANDA02170310/25/2006
PRISMASOL   BGK2/3.5
calcium chloride, magnesium chloride, dextrose monohydrate, lactic acid, sodium chloride, sodium bicarbonate, and potassium chloride solution
Product Information
Product TypeHUMAN PRESCRIPTION DRUG LABELItem Code (Source)NDC:24571-103
Route of AdministrationINTRAVENOUSDEA Schedule    
Active Ingredient/Active Moiety
Ingredient NameBasis of StrengthStrength
Calcium Chloride (Calcium Cation and Chloride Ion) Calcium Chloride0.194 g  in 1 L
Magnesium Chloride (Magnesium Cation and Chloride Ion) Magnesium Chloride0.048 g  in 1 L
Dextrose monohydrate (Anhydrous Dextrose) Dextrose monohydrate1 g  in 1 L
Lactic Acid (Lactic Acid) Lactic Acid0.270 g  in 1 L
Sodium Chloride (Sodium Cation and Chloride Ion) Sodium Chloride6.137 g  in 1 L
Sodium Bicarbonate (Sodium Cation and Bicarbonate Ion) Sodium Bicarbonate2.936 g  in 1 L
Potassium Chloride (Potassium Cation and Chloride Ion) Potassium Chloride0.149 g  in 1 L
Inactive Ingredients
Ingredient NameStrength
Water 
Carbon Dioxide 
Packaging
#Item CodePackage DescriptionMarketing Start DateMarketing End Date
1NDC:24571-103-065 L in 1 BAG
Marketing Information
Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
NDANDA02170310/25/2006
PRISMASOL   BGK2/0
magnesium chloride, dextrose monohydrate, lactic acid, sodium chloride, sodium bicarbonate, and potassium chloride solution
Product Information
Product TypeHUMAN PRESCRIPTION DRUG LABELItem Code (Source)NDC:24571-102
Route of AdministrationINTRAVENOUSDEA Schedule    
Active Ingredient/Active Moiety
Ingredient NameBasis of StrengthStrength
Magnesium Chloride (Magnesium Cation and Chloride ion) Magnesium Chloride0.048 g  in 1 L
Dextrose monohydrate (Anhydrous Dextrose) Dextrose monohydrate1 g  in 1 L
Lactic Acid (Lactic Acid) Lactic Acid0.270 g  in 1 L
Sodium Chloride (Sodium Cation and Chloride Ion) Sodium Chloride6.137 g  in 1 L
Sodium Bicarbonate (Sodium Cation and Bicarbonate Ion) Sodium Bicarbonate2.936 g  in 1 L
Potassium Chloride (Potassium Cation and Chloride Ion) Potassium Chloride0.149 g  in 1 L
Inactive Ingredients
Ingredient NameStrength
Water 
Carbon Dioxide 
Packaging
#Item CodePackage DescriptionMarketing Start DateMarketing End Date
1NDC:24571-102-065 L in 1 BAG
Marketing Information
Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
NDANDA02170310/25/2006
PRISMASOL   B22GK4/0
magnesium chloride, dextrose monohydrate, lactic acid, sodium chloride, sodium bicarbonate, and potassium chloride solution
Product Information
Product TypeHUMAN PRESCRIPTION DRUG LABELItem Code (Source)NDC:24571-111
Route of AdministrationINTRAVENOUSDEA Schedule    
Active Ingredient/Active Moiety
Ingredient NameBasis of StrengthStrength
Magnesium Chloride (Magnesium Cation and Chloride ion) Magnesium Chloride0.071 g  in 1 L
Dextrose monohydrate (Anhydrous Dextrose) Dextrose monohydrate1 g  in 1 L
Lactic Acid (Lactic Acid) Lactic Acid0.270 g  in 1 L
Sodium Chloride (Sodium Cation and Chloride Ion) Sodium Chloride6.717 g  in 1 L
Sodium Bicarbonate (Sodium Cation and Bicarbonate Ion) Sodium Bicarbonate2.100 g  in 1 L
Potassium Chloride (Potassium Cation and Chloride Ion) Potassium Chloride0.298 g  in 1 L
Inactive Ingredients
Ingredient NameStrength
Water 
Carbon Dioxide 
Packaging
#Item CodePackage DescriptionMarketing Start DateMarketing End Date
1NDC:24571-111-065 L in 1 BAG
Marketing Information
Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
NDANDA02170310/10/2008
PRISMASOL   BK0/0/1.2
magnesium chloride, lactic acid, sodium chloride, and sodium bicarbonate solution
Product Information
Product TypeHUMAN PRESCRIPTION DRUG LABELItem Code (Source)NDC:24571-113
Route of AdministrationINTRAVENOUSDEA Schedule    
Active Ingredient/Active Moiety
Ingredient NameBasis of StrengthStrength
Magnesium Chloride (Magnesium Cation and Chloride ion) Magnesium Chloride0.057 g  in 1 L
Lactic Acid (Lactic Acid) Lactic Acid0.270 g  in 1 L
Sodium Chloride (Sodium Cation and Chloride Ion) Sodium Chloride6.137 g  in 1 L
Sodium Bicarbonate (Sodium Cation and Bicarbonate Ion) Sodium Bicarbonate2.936 g  in 1 L
Inactive Ingredients
Ingredient NameStrength
Water 
Carbon Dioxide 
Packaging
#Item CodePackage DescriptionMarketing Start DateMarketing End Date
1NDC:24571-113-065 L in 1 BAG
Marketing Information
Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
NDANDA02170310/10/2008
PRISMASOL   BGK4/0/1.2
magnesium chloride, dextrose monohydrate, lactic acid, sodium chloride, sodium bicarbonate, and potassium chloride solution
Product Information
Product TypeHUMAN PRESCRIPTION DRUG LABELItem Code (Source)NDC:24571-114
Route of AdministrationINTRAVENOUSDEA Schedule    
Active Ingredient/Active Moiety
Ingredient NameBasis of StrengthStrength
Magnesium Chloride (Magnesium Cation and Chloride ion) Magnesium Chloride0.057 g  in 1 L
Dextrose monohydrate (Anhydrous Dextrose) Dextrose monohydrate1 g  in 1 L
Lactic Acid (Lactic Acid) Lactic Acid0.270 g  in 1 L
Sodium Chloride (Sodium Cation and Chloride Ion) Sodium Chloride6.137 g  in 1 L
Sodium Bicarbonate (Sodium Cation and Bicarbonate Ion) Sodium Bicarbonate2.936 g  in 1 L
Potassium Chloride (Potassium Cation and Chloride Ion) Potassium Chloride0.298 g  in 1 L
Inactive Ingredients
Ingredient NameStrength
Water 
Carbon Dioxide 
Packaging
#Item CodePackage DescriptionMarketing Start DateMarketing End Date
1NDC:24571-114-065 L in 1 BAG
Marketing Information
Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
NDANDA02170310/10/2008
Labeler - Gambro Renal Products (041093923)
Establishment
NameAddressID/FEIBusiness Operations
Gambro Renal Products041093923MANUFACTURE(24571-102, 24571-103, 24571-105, 24571-108, 24571-111, 24571-113, 24571-114)

Revised: 1/2014
 
Gambro Renal Products

Visit The National Library of Medicine Copyright, Privacy, Accessibility
U.S. National Library of Medicine, 8600 Rockville Pike, Bethesda, MD 20894
National Institutes of Health, Health & Human Services