Label: PRISMASOL BGK0/2.5- calcium chloride, magnesium chloride, dextrose monohydrate, lactic acid, sodium chloride and sodium bicarbonate solution
PRISMASOL BGK4/2.5- calcium chloride, magnesium chloride, dextrose monohydrate, lactic acid, sodium chloride, sodium bicarbonate and potassium chloride solution
PRISMASOL BGK2/3.5- calcium chloride, magnesium chloride, dextrose monohydrate, lactic acid, sodium chloride, sodium bicarbonate and potassium chloride solution
PRISMASOL BGK2/0- magnesium chloride, dextrose monohydrate, lactic acid, sodium chloride, sodium bicarbonate and potassium chloride solution
PRISMASOL B22GK4/0- magnesium chloride, dextrose monohydrate, lactic acid, sodium chloride, sodium bicarbonate and potassium chloride solution
PRISMASOL BK0/0/1.2- magnesium chloride, lactic acid, sodium chloride and sodium bicarbonate solution
PRISMASOL BGK4/0/1.2- magnesium chloride, dextrose monohydrate, lactic acid, sodium chloride, sodium bicarbonate and potassium chloride solution

  • NDC Code(s): 24571-102-06, 24571-103-06, 24571-105-06, 24571-108-06, view more
    24571-111-06, 24571-113-06, 24571-114-06
  • Packager: Gambro Renal Products
  • Category: HUMAN PRESCRIPTION DRUG LABEL
  • DEA Schedule: None
  • Marketing Status: New Drug Application

Drug Label Information

Updated 01/14

If you are a consumer or patient please visit this version.

  • HIGHLIGHTS OF PRESCRIBING INFORMATION
    These highlights do not include all the information needed to use PrismaSol solution safely and effectively. See full prescribing information for PrismaSol solution.

    PrismaSol ® solution, for intravenous administration.
    Initial U.S. Approval: 2006

    INDICATIONS AND USAGE

    PrismaSol solution is indicated: (1)

    • As a replacement solution in Continuous Renal Replacement Therapy (CRRT)
    • In case of drug poisoning when CRRT is used

    DOSAGE AND ADMINISTRATION

    The mode of therapy, solute formulations, flow rates and length of therapy should be selected by the physician responsible for managing treatment depending on the clinical condition of the patient as well as the patient's fluid, electrolyte, acid base and glucose balance. (2)

    DOSAGE FORMS AND STRENGTHS

    1000 mL of the reconstituted PrismaSol solution contains (in mEq/L except where noted): (3)

    BGK 0/2.5 BGK 4/2.5 BGK 2/3.5 BGK 2/0
    Ca2+ 2.5 2.5 3.5 0
    HCO3- 32 32 32 32
    K+ 0 4.0 2.0 2.0
    Mg2+ 1.5 1.5 1.0 1.0
    Na+ 140 140 140 140
    Cl- 109.0 113.0 111.5 108.0
    Lactate 3.0 3.0 3.0 3.0
    Dextrose 100 mg/dL 100 mg/dL 100 mg/dL 100 mg/dL
    B22GK 4/0 BK 0/0/1.2 BGK 4/0/1.2
    Ca2+ 0 0 0
    HCO3- 22 32 32
    K+ 4.0 0 4.0
    Mg2+ 1.5 1.2 1.2
    Na+ 140 140 140
    Cl- 120.5 106.2 110.2
    Lactate 3.0 3.0 3.0
    Dextrose 100 mg/dL 0 100 mg/dL

    CONTRAINDICATIONS

    None (4)

    WARNINGS AND PRECAUTIONS

    • The solution in compartment A must be mixed with the solution of compartment B before use. Due to chemical reasons, after removal of the overwrap, the solution is stable for 24 hours including the duration of the treatment.
    • Do not administer the reconstituted solution unless it is clear and free of visible particulate matter.
    • The patient's hemodynamic fluid, electrolyte and acid-base balance should be monitored throughout the procedure. Abnormalities in the plasma concentration of potassium, calcium, and glucose may be corrected by the use of appropriate formulations of PrismaSol solution.
    • Use only with continuous extra-corporeal blood purification equipment in CRRT.
    • The solution may be heated to no more than 40°C/104°F inside of the overwrap and this must be carefully controlled.

    ADVERSE REACTIONS

    Improper use can lead to fluid imbalance and disturbances in electrolyte, acid-base and glucose balance. (6)


    To report SUSPECTED ADVERSE REACTIONS, contact Gambro at 1800-651-2623 / www.gambro.com or FDA 1-800-FDA-1088 or www.fda.gov/medwatch (6)

    Revised: 1/2014

    Close
  • FULL PRESCRIBING INFORMATION: CONTENTS*
  • 1 INDICATION AND USAGE

    PrismaSol solution is indicated in adults and children for use as a replacement solution in Continuous Renal Replacement Therapy (CRRT) to replace plasma volume removed by ultrafiltration and to correct electrolytes and acid-base imbalances. PrismaSol solution may also be used in case of drug poisoning when CRRT is used to remove filterable substances.

    Close
  • 2 DOSAGE AND ADMINISTRATION

    2.1 Individualization of Treatments

    The mode of therapy, solute formulation, flow rates and length of therapy should be selected by the physician responsible for managing treatment depending on the clinical condition of the patient as well as the patient's fluid, electrolyte, acid base and glucose balance. PrismaSol solution can be administered into the extra-corporeal circuit before (pre-dilution) and/or after the hemofilter or hemodiafilter (post-dilution).

    In post-dilution hemofiltration, the replacement rate should not be greater than one third of the blood flow rate; e.g., for blood flow of 100 mL/min, equivalent to 6000 mL/hour, post-filter replacement rate should not exceed 2000 mL/hour.

    2.2 Directions for use

    PrismaSol solution should be inspected visually for particulate matter and discoloration prior to administration. Use only if the solution is clear and all seals, including the peel seal between the compartments, are intact. Press bag firmly to test for any leakage. Do not use if container is damaged or leaking.

    When connecting solution bags, follow the instructions in this leaflet for correct use of the access ports. Incorrect use of the access port or other restrictions to fluid flow might lead to incorrect patient weight loss and may result in machine alarms. Continuing treatment without resolving the originating cause may result in patient injury or death.

    The electrolyte solution (small compartment A) is added to the buffer solution (large compartment B) by opening the peel seal immediately before use and mixing the contents of compartments A and B.

    Figure

    • The reconstituted solution is for single patient use only
    • Aseptic technique should be used throughout administration to the patient.
    • Discard any unused solution.

    As soon as the overwrap is removed, the reconstitution of compartments A and B should be done and the reconstituted solution should be used immediately.

    Due to chemical reasons, after removal of the overwrap, the solution is stable for 24 hours including the duration of the treatment.

    Figure 1
     
    Step 1 Immediately before use, remove the overwrap from the bag and mix the solutions in the two different compartments. Hold the small compartment with both hands and squeeze it until an opening is created in the peel seal. (See Figure 1 beside)
    Figure 2 Step 2 Squeeze with both hands on the large compartment until the peel seal between the two compartments is entirely open. Shake gently to mix. (See Figure 2 beside)

    The solution is now ready for use and can be hung on the equipment.

    Step 3 The replacement line may be connected to the bag through either of the luer connector or the injection connector (or spike connector).

    Figure 3a
     
    Step 3a The luer connector is a needle-less and swabbable connector. Remove the cap with a twist and pull motion, and connect the male luer lock on the replacement line to the female luer receptor on the bag. (See Figure 3a beside)

    Ensure that the connection is fully seated and tighten. The connector is now open. Verify that the fluid is flowing freely during use.

    When the replacement line is disconnected from the luer connector, the connector will close and the flow of the solution will stop.
    Figure 3b Step 3b If the injection connector (or spike connector) is used, first remove the snap-off cap. Then introduce the replacement line spike through the rubber septum of the bag connector. (See Figure 3b beside)

    Ensure that the spike is fully inserted and verify that the fluid is flowing freely during use.

    Additions: The large compartment B is fitted with an injection connector (or spike connector) for the addition of drugs after reconstitution of the solution. When introducing additives, use aseptic techniques.

    Phosphate: Phosphate up to 1.2 mmol/L may be added to the solution. If potassium phosphate is added, the total potassium concentration should not exceed 4 mEq/L.

    Other drugs: Some drugs may be incompatible with PrismaSol solution. In general, other drugs should be administered through a different line.

    Close
  • 3 DOSAGE FORMS AND STRENGTHS

    PrismaSol Solutions
    BGK0/2.5 BGK4/2.5 BGK2/3.5 BGK2/0 B22GK4/0 BK0/0/1.2 BGK4/0/1.2

    Each PrismaSol solution represents of a unique combination of the active ingredients listed below.

    BEFORE RECONSTITUTION

    1000 mL of clear electrolyte solution (small compartment A) contains (g):

    Active ingredients PrismaSol
    BGK 0/2.5
    PrismaSol
    BGK 4/2.5
    PrismaSol
    BGK 2/3.5
    PrismaSol
    BGK 2/0
    PrismaSol
    B22GK 4/0
    PrismaSol
    BK 0/0/1.2
    PrismaSol
    BGK 4/0/1.2
    Calcium chloride • 2 H2O 3.68 3.68 5.15 0 0 0 0
    Magnesium chloride • 6 H2O 3.05 3.05 2.03 2.03 3.05 2.44 2.44
    Dextrose anhydrous 20.0 20.0 20.0 20.0 20.0 0 20.0
    (as dextrose monohydrate) 22.0 22.0 22.0 22.0 22.0 0 22.0
    Lactic acid 5.40 5.40 5.40 5.40 5.40 5.40 5.40

    1000 mL of buffer solution (large compartment B) contains (g):

    Active ingredients PrismaSol
    BGK 0/2.5
    PrismaSol
    BGK 4/2.5
    PrismaSol
    BGK 2/3.5
    PrismaSol
    BGK 2/0
    PrismaSol
    B22GK 4/0
    PrismaSol
    BK 0/0/1.2
    PrismaSol
    BGK 4/0/1.2
    Sodium chloride 6.46 6.46 6.46 6.46 7.07 6.46 6.46
    Sodium bicarbonate 3.09 3.09 3.09 3.09 2.21 3.09 3.09
    Potassium chloride 0 0.314 0.157 0.157 0.314 0 0.314

    AFTER RECONSTITUTION OF COMPARTMENTS A AND B

    1000 mL of the clear reconstituted solution contains:

    in mEq/L except where noted PrismaSol
    BGK 0/2.5
    PrismaSol
    BGK 4/2.5
    PrismaSol
    BGK 2/3.5
    PrismaSol
    BGK 2/0
    PrismaSol
    B22GK 4/0
    PrismaSol
    BK 0/0/1.2
    PrismaSol
    BGK 4/0/1.2
    Calcium, Ca2+ 2.5 2.5 3.5 0 0 0 0
    Bicarbonate, HCO3- 32 32 32 32 22 32 32
    Potassium, K+ 0 4.0 2.0 2.0 4.0 0 4.0
    Magnesium, Mg2+ 1.5 1.5 1.0 1.0 1.5 1.2 1.2
    Sodium, Na+ 140 140 140 140 140 140 140
    Chloride, Cl- 109.0 113.0 111.5 108.0 120.5 106.2 110.2
    Lactate 3.0 3.0 3.0 3.0 3.0 3.0 3.0
    Dextrose 100 mg/dL 100 mg/dL 100 mg/dL 100 mg/dL 100 mg/dL 0 100 mg/dL
    Theoretical Osmolarity 292
    mOsm/L
    300
    mOsm/L
    296
    mOsm/L
    291
    mOsm/L
    296
    mOsm/L
    282
    mOsm/L
    295
    mOsm/L
    Close
  • 4 CONTRAINDICATIONS

    There is no known contraindication to the use of PrismaSol solution.

    Close
  • 5 WARNINGS AND PRECAUTIONS

    The electrolyte solution contained in compartment A must be mixed with the buffer solution of compartment B before use in order to obtain the reconstituted solution suitable for hemofiltration /hemodiafiltration.

    Due to chemical reasons, after removal of the overwrap, the solution is stable for 24 hours including the duration of the treatment.

    Do not administer the reconstituted solution unless it is clear and free of visible particulate matter.

    PrismaSol solution includes several formulations. Selection of a specific formulation depends on the patient's condition and treatment procedures.

    Administration of the solution should only be under the direction of a physician competent in intensive care treatment including CRRT.

    The patient's hemodynamic fluid, electrolyte and acid-base balance should be monitored throughout the procedure. Note that citrate, when used as an anticoagulant, contributes to the base load and can reduce plasma calcium levels.

    During hemofiltration or hemodiafiltration, abnormalities in the plasma concentration of potassium, calcium, and glucose may develop. These abnormalities may be corrected by the use of appropriate formulations of PrismaSol solution. Abnormalities in plasma phosphate concentration, especially hypophosphatemia, may also occur. Hypophosphatemia may require phosphate supplementation to maintain plasma concentrations in the physiologic range.

    Use only with continuous extra-corporeal blood purification equipment in CRRT.

    When connecting solution bags, follow the instructions in this leaflet for correct use of the access ports. Incorrect use of the access port or other restrictions to fluid flow might lead to incorrect patient weight loss and may result in machine alarms. Continuing treatment without resolving the originating cause may result in patient injury or death.

    The solution may be heated to no more than 40°C/104°F inside of the overwrap and this must be carefully controlled. After heating, verify that the solution remains clear and contains no particulate matter.

    Diabetes Mellitus or Glucose Intolerance

    Patients may require initiation of insulin therapy or modification of insulin dosage during treatment with PrismaSol solution. Appropriate monitoring of blood glucose should be performed and insulin dosage adjusted accordingly.

    Close
  • 6 ADVERSE REACTIONS

    Adverse reactions can result from the solution or the CRRT procedure.

    Improper use can lead to fluid imbalance and disturbances in electrolyte, acid-base and glucose balance.

    Close
  • 7 DRUG INTERACTIONS

    As with the use of other replacement solutions, blood concentrations of filterable drugs may be influenced by CRRT.

    The blood concentrations of certain drugs may need to be monitored and appropriate therapy implemented to correct for removal during treatment. In patients with cardiovascular disease, especially those using cardiac glycoside medications, plasma levels of calcium, potassium and magnesium must be carefully monitored.

    Close
  • 8 USE IN SPECIFIC POPULATION

    8.1 Pregnancy

    Pregnancy Category C.

    PrismaSol solution is a replacement solution of electrolytes, bicarbonate and dextrose and is pharmacologically inactive. Animal reproduction studies have not been conducted with PrismaSol solution. While there are no adequate and well controlled studies in pregnant women, appropriate administration of PrismaSol solution with monitoring of fluid, electrolyte, acid-base and glucose balance, is not expected to cause fetal harm, or affect reproductive capacity. Maintenance of normal acid-base balance is important for fetal well being.

    8.3 Nursing Mothers

    PrismaSol solution is a replacement solution of electrolytes, bicarbonate and dextrose and is pharmacologically inactive. The components of PrismaSol solution are excreted in human milk. Appropriate administration of PrismaSol solution with monitoring of fluid, electrolyte, acid-base and glucose balance, is not expected to harm a nursing infant.

    8.4 Pediatric

    Safety and effectiveness have been established based on published clinical data of CCRT replacement solutions used in adults and children. Two hemofiltration studies have shown that CRRT can be used to treat pediatric patients, including a study of newborns to 17 years olds. These pediatric studies utilized replacement solutions with a composition similar to PrismaSol Solutions. No adequate and well-controlled studies have been conducted with PrismaSol Solutions in pediatric patients.

    8.5 Geriatric

    Safety and effectiveness in geriatric patients have been reported in some studies on the general population. No formal specific study was carried out in the geriatric population.

    Although clinical experience has not identified differences in responses between elderly and younger patients, greater sensitivity of some individuals cannot be ruled out.

    Close
  • 10 OVERDOSAGE

    Overdosage with PrismaSol solution should not occur if the procedure is carried out appropriately with careful monitoring of fluid, electrolyte, acid-base and glucose balance. However, overdosage can occur if fluid administration is in excess of the volume required to achieve the prescribed fluid balance or if delivery of a solute component in the solution exceeds a patient's needs. On the other hand, excessive fluid and solute removal may also occur in CRRT, potentially resulting in volume depletion and solute deficits.

    The management of either an excess or deficiency state with respect to fluid, electrolyte and acid-base balance may involve modifications in the rate of administration and/or the composition of CRRT solutions. In conjunction with these changes, adjustments in the effluent (dialysate or ultrafiltrate) rate may need to occur.

    Close
  • 11 DESCRIPTION

    PrismaSol solution is a clear, sterile solution free of bacterial endotoxins. This solution is used in Continuous Renal Replacement Therapies (CRRT) as a replacement solution in hemofiltration and hemodiafiltration.

    It contains no bacteriostatic or antimicrobial agents.

    PrismaSol solution is packaged in a two-compartment bag. The small compartment A contains electrolytes and the large compartment B contains buffer. The final reconstituted solution (5000 mL) is obtained after breaking the peel seal between compartment A and B and mixing both solutions.

    Calcium chloride, USP, is chemically designated calcium chloride dihydrate (CaCl2 • 2 H2O).
    Magnesium chloride, USP, is chemically designated magnesium chloride hexahydrate (MgCl2 • 6 H2O).
    Dextrose, USP, is chemically designated D-Glucose anhydrous (C6H12O6) or D-Glucose monohydrate (C6H12O6 • H2O).
    Lactic acid, USP, is chemically designated CH3CH(OH)COOH.
    Sodium chloride, USP, is chemically designated NaCl.
    Potassium chloride, USP, is chemically designated KCl.
    Sodium bicarbonate, USP, is chemically designated NaHCO3.

    The pH of the final solution is in the range of 7.0 to 8.5.

    Close
  • 12 CLINICAL PHARMACOLOGY

    12.1 Mechanism of Action

    PrismaSol solution is a pharmacologically inactive solution. The electrolyte concentrations in the PrismaSol solutions are chosen to restore plasma levels to clinically desired concentrations or maintain plasma levels at the desired concentrations.

    PrismaSol solution is used as replacement solution to replace water and electrolytes removed during hemofiltration and hemodiafiltration. Bicarbonate in the solution is used as an alkalinizing buffer to normalize acid-base balance.Lactate is used for the adjustment of the solution pH and is metabolized to bicarbonate.

    When dextrose is present, it is intended to help normalize glucose balance.

    12.2 Pharmacokinetics

    The distribution of electrolytes, bicarbonate and dextrose is determined by the patient's clinical condition, metabolic status, and residual renal function.

    The elimination and replacement of water, electrolytes and buffer depend on the patient's electrolyte and acid-base balance, metabolic status, residual renal function and ongoing physiologic losses through intestinal, respiratory and cutaneous routes.

    Close
  • 16 HOW SUPPLIED STORAGE AND HANDLING

    PrismaSol solution is supplied in a two compartment bag made of polyolefin. Polyolefin does not contain the chemical component di-2-ethyl hexyl phthalate (DEHP).

    The 5000 mL bag is composed of a small compartment (250 mL) and a large compartment (4750 mL). The two compartments are separated by a peel seal.

    The bag is overwrapped with a transparent overwrap.

    Container Fill Volume NDC
    PrismaSol BGK0/2.5 5000 mL 24571-108-06
    PrismaSol BGK4/2.5 5000 mL 24571-105-06
    PrismaSol BGK2/3.5 5000 mL 24571-103-06
    PrismaSol BGK2/0 5000 mL 24571-102-06
    PrismaSol B22GK4/0 5000 mL 24571-111-06
    PrismaSol BK0/0/1.2 5000 mL 24571-113-06
    PrismaSol BGK4/0/1.2 5000 mL 24571-114-06

    Not all formulations may be marketed.

    Storage conditions

    Store at 20°C to 25°C (68°F to 77°F); excursions permitted to 15°-30°C (59°-86°F). [See USP Controlled Room Temperature]

    Do not freeze or expose to excessive heat. Do not use if precipitate has formed or if container seals have been damaged.

    Close
  • SPL UNCLASSIFIED SECTION

    Manufactured by:
    Gambro Renal Products, Inc
    1845 Mason Avenue
    Daytona Beach, FL 32117, USA

    Close
  • PRINCIPAL DISPLAY PANEL

    PRINCIPAL DISPLAY PANEL - BGK0/2.5 Bag Label

    NDC# 24571-108-06

    0K+
    mEq/L

    2.5Ca2+
    mEq/L

    PrismaSol® BGK0/2.5
    Replacement Solution for Continuous Renal Replacement Therapy

    Rx only

    A
    250 mL

    B
    4750 mL

    Before reconstitution each 1000 mL contains (g) A B
    Calcium chloride • 2 H2O 3.68
    Magnesium chloride • 6 H2O 3.05
    Dextrose anhydrous 20.0
    (as dextrose monohydrate) 22.0
    Sodium chloride 6.46
    Lactic acid 5.40
    Sodium bicarbonate 3.09
    Water for injections qs, Carbon dioxide for pH adjustment
    After reconstitution, A + B
    Calcium
    Ca2+
    Magnesium
    Mg2+
    Sodium
    Na+
    Chloride
    Cl-
    Lactate
    C3H5O3-
    Bicarbonate
    HCO3-
    Potassium
    K+
    Dextrose
    mmol/L 1.25 0.75 140 109.0 3.0 32 0 5.5
    mEq/L 2.5 1.5 140 109.0 3.0 32 0 (100mg/dL)
    Theoretical osmolarity: 292 mOsm/L pH: 7.0 – 8.5

    Mix both compartments before use.
    See package insert for dosage information and
    further instructions.
    Sterile and free from bacterial endotoxins.
    Confirm the integrity of the packaging. Use only
    if solution is clear. For single use only. DISCARD
    ANY UNUSED SOLUTION.
    Store at 20°C to 25°C (68°F to 77°F); excursions
    permitted to 15°C - 30°C (59°F - 86°F). [See USP
    Controlled room Temperature.]
    Do not freeze or expose to excessive heat.
    As soon as the overwrap is removed, the recon-
    stitution of compartments A and B should be
    done and the reconstituted solution should be
    used immediately. After removal of the overwrap,
    the solution is stable for 24 hours including the
    duration of the treatment. (See insert for further
    information.)
    This product is latex free.

    5000 mL

    GAMBRO®

    EAN-14: 07332414091613
    Batch No. and expiry date are printed on the
    back of the bag.
    Manufactured by: Gambro Renal Products, Inc., 1845 Mason Avenue,
    Daytona Beach, FL 32117, USA

    Product No: 110240

    R E P L A C E M E N T
    Solution for Continuous Renal Replacement Therapy

    D07200042 2012-07/1

    PRINCIPAL DISPLAY PANEL - BGK0/2.5 Bag Label
    Close
  • PRINCIPAL DISPLAY PANEL

    PRINCIPAL DISPLAY PANEL - BGK4/2.5 Bag Label

    NDC# 24571-105-06

    4K+
    mEq/L

    2.5Ca2+
    mEq/L

    PrismaSol® BGK4/2.5
    Replacement Solution for Continuous Renal Replacement Therapy

    Rx only

    A
    250 mL

    B
    4750 mL

    Before reconstitution each 1000 mL contains (g) A B
    Calcium chloride • 2 H2O 3.68
    Magnesium chloride • 6 H2O 3.05
    Dextrose anhydrous 20.0
    (as dextrose monohydrate) 22.0
    Sodium chloride 6.46
    Potassium chloride 0.314
    Lactic acid 5.40
    Sodium bicarbonate 3.09
    Water for Injections qs, Carbon dioxide for pH adjustment
    After reconstitution, A + B
    Calcium
    Ca2+
    Magnesium
    Mg2+
    Sodium
    Na+
    Chloride
    Cl-
    Lactate
    C3H5O3-
    Bicarbonate
    HCO3-
    Potassium
    K+
    Dextrose
    mmol/L 1.25 0.75 140 113.0 3.0 32 4.0 5.5
    mEq/L 2.5 1.5 140 113.0 3.0 32 4.0 (100 mg/dL)
    Theoretical osmolarity: 300 mOsm/L pH: 7.0 – 8.5

    Mix both compartments before use.
    See package insert for dosage information and
    further instructions.
    Sterile and free from bacterial endotoxins.
    Confirm the integrity of the packaging. Use only
    if solution is clear. For single use only. DISCARD
    ANY UNUSED SOLUTION.
    Store at 20°C to 25°C (68°F to 77°F); excursions
    permitted to 15°C - 30°C (59°F - 86°F). [See USP
    Controlled room Temperature.]
    Do not freeze or expose to excessive heat.
    As soon as the overwrap is removed, the recon-
    stitution of compartments A and B should be
    done and the reconstituted solution should be
    used immediately. After removal of the overwrap,
    the solution is stable for 24 hours including the
    duration of the treatment. (See insert for further
    information.)
    This product is latex free.

    5000 mL

    GAMBRO®

    EAN-14: 07332414091637
    Batch No. and expiry date are printed on the
    back of the bag.
    Manufactured by: Gambro Renal Products, Inc., 1845 Mason Avenue,
    Daytona Beach, FL 32117, USA

    Product No: 110242

    R E P L A C E M E N T
    Solution for Continuous Renal Replacement Therapy

    D07200037 2012-07/01

    PRINCIPAL DISPLAY PANEL - BGK4/2.5 Bag Label
    Close
  • PRINCIPAL DISPLAY PANEL

    PRINCIPAL DISPLAY PANEL - BGK2/3.5 Bag Label

    NDC# 24571-103-06

    2K+
    mEq/L

    3.5Ca2+
    mEq/L

    PrismaSol® BGK2/3.5
    Replacement Solution for Continuous Renal Replacement Therapy

    Rx only

    A
    250 mL

    B
    4750 mL

    Before reconstitution each 1000 mL contains (g) A B
    Calcium chloride • 2 H2O 5.15
    Magnesium chloride • 6 H2O 2.03
    Dextrose anhydrous 20.0
    (as dextrose monohydrate) 22.0
    Sodium chloride 6.46
    Potassium chloride 0.157
    Lactic acid 5.40
    Sodium bicarbonate 3.09
    Water for injections qs, Carbon dioxide for pH adjustment
    After reconstitution, A + B
    Calcium
    Ca2+
    Magnesium
    Mg2+
    Sodium
    Na+
    Chloride
    Cl-
    Lactate
    C3H5O3-
    Bicarbonate
    HCO3-
    Potassium
    K+
    Dextrose
    mmol/L 1.75 0.5 140 111.5 3.0 32 2.0 5.5
    mEq/L 3.5 1.0 140 111.5 3.0 32 2.0 (100 mg/dL)
    Theoretical osmolarity: 296 mOsm/L pH: 7.0 – 8.5

    Mix both compartments before use.
    See package insert for dosage information and
    further instructions.
    Sterile and free from bacterial endotoxins.
    Confirm the integrity of the packaging. Use only
    if solution is clear. For single use only. DISCARD
    ANY UNUSED SOLUTION.
    Store at 20°C to 25°C (68°F to 77°F); excursions
    permitted to 15°C - 30°C (59°F - 86°F). [See USP
    Controlled room Temperature.]
    Do not freeze or expose to excessive heat.
    As soon as the overwrap is removed, the recon-
    stitution of compartments A and B should be
    done and the reconstituted solution should be
    used immediately. After removal of the overwrap,
    the solution is stable for 24 hours including the
    duration of the treatment. (See insert for further
    information.)
    This product is latex free.

    5000 mL

    GAMBRO®

    EAN-14: 07332414091644
    Batch No. and expiry date are printed on the
    back of the bag.
    Manufactured by: Gambro Renal Products, Inc., 1845 Mason Avenue,
    Daytona Beach, FL 32117, USA

    Product No: 110243

    R E P L A C E M E N T
    Solution for Continuous Renal Replacement Therapy

    D07200038 2012-07/1

    PRINCIPAL DISPLAY PANEL - BGK2/3.5 Bag Label
    Close
  • PRINCIPAL DISPLAY PANEL

    PRINCIPAL DISPLAY PANEL - BGK2/0 Bag Label

    NDC# 24571-102-06

    2K+
    mEq/L

    0Ca2+
    mEq/L

    PrismaSol® BGK2/0
    Replacement Solution for Continuous Renal Replacement Therapy

    Rx only

    A
    250 mL

    B
    4750 mL

    Before reconstitution each 1000 mL contains (g) A B
    Magnesium chloride • 6 H2O 2.03
    Dextrose anhydrous 20.0
    (as dextrose monohydrate) 22.0
    Sodium chloride 6.46
    Potassium chloride 0.157
    Lactic acid 5.40
    Sodium bicarbonate 3.09
    Water for injections qs, Carbon dioxide for pH adjustment
    After reconstitution, A + B
    Calcium
    Ca2+
    Magnesium
    Mg2+
    Sodium
    Na+
    Chloride
    Cl-
    Lactate
    C3H5O3-
    Bicarbonate
    HCO3-
    Potassium
    K+
    Dextrose
    mmol/L 0 0.5 140 108.0 3.0 32 2.0 5.5
    mEq/L 0 1.0 140 108.0 3.0 32 2.0 (100 mg/dL)
    Theoretical osmolarity: 291 mOsm/L pH: 7.0 – 8.5

    Mix both compartments before use.
    See package insert for dosage information and
    further instructions.
    Sterile and free from bacterial endotoxins.
    Confirm the integrity of the packaging. Use only
    if solution is clear. For single use only. DISCARD
    ANY UNUSED SOLUTION.
    Store at 20°C to 25°C (68°F to 77°F); excursions
    permitted to 15°C - 30°C (59°F - 86°F). [See USP
    Controlled room Temperature.]
    Do not freeze or expose to excessive heat.
    As soon as the overwrap is removed, the recon-
    stitution of compartments A and B should be
    done and the reconstituted solution should be
    used immediately. After removal of the overwrap,
    the solution is stable for 24 hours including the
    duration of the treatment. (See insert for further
    information.)
    This product is latex free.

    5000 mL

    GAMBRO®

    EAN-14: 07332414091651
    Batch No. and expiry date are printed on the
    back of the bag.
    Manufactured by: Gambro Renal Products, Inc., 1845 Mason Avenue,
    Daytona Beach, FL 32117, USA

    Product No: 110244

    R E P L A C E M E N T
    Solution for Continuous Renal Replacement Therapy

    D07200039 2012-07/1

    PRINCIPAL DISPLAY PANEL - BGK2/0 Bag Label
    Close
  • PRINCIPAL DISPLAY PANEL

    PRINCIPAL DISPLAY PANEL - B22GK4/0 Bag Label

    NDC# 24571-111-06

    4K+
    mEq/L

    Bicarbonate 22

    0Ca2+
    mEq/L

    PrismaSol® B22GK4/0
    Replacement Solution for Continuous Renal Replacement Therapy

    Rx only

    A
    250 mL

    B
    4750 mL

    Before reconstitution each 1000 mL contains (g) A B
    Magnesium chloride • 6 H2O 3.05
    Dextrose anhydrous 20.0
    (as dextrose monohydrate) 22.0
    Sodium chloride 7.07
    Potassium chloride 0.314
    Lactic acid 5.40
    Sodium bicarbonate 2.21
    Water for injections qs, Carbon dioxide for pH adjustment
    After reconstitution, A + B
    Calcium
    Ca2+
    Magnesium
    Mg2+
    Sodium
    Na+
    Chloride
    Cl-
    Lactate
    C3H5O3-
    Bicarbonate
    HCO3-
    Potassium
    K+
    Dextrose
    mmol/L 0 0.75 140 120.5 3.0 22 4.0 5.5
    mEq/L 0 1.5 140 120.5 3.0 22 4.0 (100mg/dL)
    Theoretical osmolarity: 296 mOsm/L pH: 7.0 – 8.5

    Mix both compartments before use.
    See package insert for dosage information and
    further instructions.
    Sterile and free from bacterial endotoxins.
    Confirm the integrity of the packaging. Use only
    if solution is clear. For single use only. DISCARD
    ANY UNUSED SOLUTION.
    Store at 20°C to 25°C (68°F to 77°F); excursions
    permitted to 15°C - 30°C (59°F - 86°F). [See USP
    Controlled room Temperature.]
    Do not freeze or expose to excessive heat.
    As soon as the overwrap is removed, the recon-
    stitution of compartments A and B should be
    done and the reconstituted solution should be
    used immediately. After removal of the overwrap,
    the solution is stable for 24 hours including the
    duration of the treatment. (See insert for further
    information.)
    This product is latex free.

    5000 mL

    GAMBRO®

    EAN-14: 07332414116781
    Batch No. and expiry date are printed on the
    back of the bag.
    Manufactured by: Gambro Renal Products, Inc., 1845 Mason Avenue,
    Daytona Beach, FL 32117, USA

    Product No: 115001

    R E P L A C E M E N T
    Solution for Continuous Renal Replacement Therapy

    D11000102 2012-07/1

    PRINCIPAL DISPLAY PANEL - B22GK4/0 Bag Label
    Close
  • PRINCIPAL DISPLAY PANEL

    PRINCIPAL DISPLAY PANEL - BK0/0/1.2 Bag Label

    NDC# 24571-113-06

    0K+
    mEq/L

    0Ca2+
    mEq/L

    PrismaSol® BGK0/0/1.2
    Replacement Solution for Continuous Renal Replacement Therapy

    Rx only

    A
    250 mL

    B
    4750 mL

    Before reconstitution each 1000 mL contains (g) A B
    Magnesium chloride • 6 H2O 2.44
    Sodium chloride 6.46
    Lactic acid 5.40
    Sodium bicarbonate 3.09
    Water for injections qs, Carbon dioxide for pH adjustment
    After reconstitution, A + B
    Calcium
    Ca2+
    Magnesium
    Mg2+
    Sodium
    Na+
    Chloride
    Cl-
    Lactate
    C3H5O3-
    Bicarbonate
    HCO3-
    Potassium
    K+
    Dextrose
    mmol/L 0 0.6 140 106.2 3.0 32 0 0
    mEq/L 0 1.2 140 106.2 3.0 32 0 (0mg/dL)
    Theoretical osmolarity: 282 mOsm/L pH: 7.0 – 8.5

    Mix both compartments before use.
    See package insert for dosage information and
    further instructions.
    Sterile and free from bacterial endotoxins.
    Confirm the integrity of the packaging. Use only
    if solution is clear. For single use only. DISCARD
    ANY UNUSED SOLUTION.
    Store at 20°C to 25°C (68°F to 77°F); excursions
    permitted to 15°C - 30°C (59°F - 86°F). [See USP
    Controlled room Temperature.]
    Do not freeze or expose to excessive heat.
    As soon as the overwrap is removed, the recon-
    stitution of compartments A and B should be
    done and the reconstituted solution should be
    used immediately. After removal of the overwrap,
    the solution is stable for 24 hours including the
    duration of the treatment. (See insert for further
    information.)
    This product is latex free.

    5000 mL

    GAMBRO®

    EAN-14: 07332414091309
    Batch No. and expiry date are printed on the
    back of the bag.
    Manufactured by: Gambro Renal Products, Inc., 1845 Mason Avenue,
    Daytona Beach, FL 32117, USA

    Product No: 110239

    R E P L A C E M E N T
    Solution for Continuous Renal Replacement Therapy

    D07200041 2012-07/1

    PRINCIPAL DISPLAY PANEL - BK0/0/1.2 Bag Label
    Close
  • PRINCIPAL DISPLAY PANEL

    PRINCIPAL DISPLAY PANEL - BGK4/0/1.2 Bag Label

    NDC# 24571-114-06

    4K+
    mEq/L

    0Ca2+
    mEq/L

    PrismaSol® BGK4/0/1.2
    Replacement Solution for Continuous Renal Replacement Therapy

    Rx only

    A
    250 mL

    B
    4750 mL

    Before reconstitution each 1000 mL contains (g) A B
    Magnesium chloride • 6 H2O 2.44
    Dextrose anhydrous 20.0
    (as dextrose monohydrate) 22.0
    Sodium chloride 6.46
    Potassium chloride 0.314
    Lactic acid 5.40
    Sodium bicarbonate 3.09
    Water for injections qs, Carbon dioxide for pH adjustment
    After reconstitution, A + B
    Calcium
    Ca2+
    Magnesium
    Mg2+
    Sodium
    Na+
    Chloride
    Cl-
    Lactate
    C3H5O3-
    Bicarbonate
    HCO3-
    Potassium
    K+
    Dextrose
    mmol/L 0 0.6 140 110.2 3.0 32 4.0 5.5
    mEq/L 0 1.2 140 110.2 3.0 32 4.0 (100 mg/dL)
    Theoretical osmolarity: 295 mOsm/L pH: 7.0 – 8.5

    Mix both compartments before use.
    See package insert for dosage information and
    further instructions.
    Sterile and free from bacterial endotoxins.
    Confirm the integrity of the packaging. Use only
    if solution is clear. For single use only. DISCARD
    ANY UNUSED SOLUTION.
    Store at 20°C to 25°C (68°F to 77°F); excursions
    permitted to 15°C - 30°C (59°F - 86°F). [See USP
    Controlled room Temperature.]
    Do not freeze or expose to excessive heat.
    As soon as the overwrap is removed, the recon-
    stitution of compartments A and B should be
    done and the reconstituted solution should be
    used immediately. After removal of the overwrap,
    the solution is stable for 24 hours including the
    duration of the treatment. (See insert for further
    information.)
    This product is latex free.

    5000 mL

    GAMBRO®

    EAN-14: 07332414091620
    Batch No. and expiry date are printed on the
    back of the bag.
    Manufactured by: Gambro Renal Products, Inc., 1845 Mason Avenue,
    Daytona Beach, FL 32117, USA

    Product No: 110241

    R E P L A C E M E N T
    Solution for Continuous Renal Replacement Therapy

    D07200043 2012-07/1

    PRINCIPAL DISPLAY PANEL - BGK4/0/1.2 Bag Label
    Close
  • INGREDIENTS AND APPEARANCE
    PRISMASOL   BGK0/2.5
    calcium chloride, magnesium chloride, dextrose monohydrate, lactic acid, sodium chloride, and sodium bicarbonate solution
    Product Information
    Product Type HUMAN PRESCRIPTION DRUG LABEL Item Code (Source) NDC:24571-108
    Route of Administration INTRAVENOUS DEA Schedule     
    Active Ingredient/Active Moiety
    Ingredient Name Basis of Strength Strength
    Calcium Chloride (Calcium Cation and Chloride Ion) Calcium Chloride 0.139 g  in 1 L
    Magnesium Chloride (Magnesium Cation and Chloride Ion) Magnesium Chloride 0.071 g  in 1 L
    Dextrose monohydrate (Anhydrous Dextrose) Dextrose monohydrate 1 g  in 1 L
    Lactic Acid (Lactic Acid) Lactic Acid 0.270 g  in 1 L
    Sodium Chloride (Sodium Cation and Chloride Ion) Sodium Chloride 6.137 g  in 1 L
    Sodium Bicarbonate (Sodium Cation and Bicarbonate Ion) Sodium Bicarbonate 2.936 g  in 1 L
    Inactive Ingredients
    Ingredient Name Strength
    Water  
    Carbon Dioxide  
    Packaging
    # Item Code Package Description Marketing Start Date Marketing End Date
    1 NDC:24571-108-06 5 L in 1 BAG
    Marketing Information
    Marketing Category Application Number or Monograph Citation Marketing Start Date Marketing End Date
    NDA NDA021703 10/25/2006
    PRISMASOL   BGK4/2.5
    calcium chloride, magnesium chloride, dextrose monohydrate, lactic acid, sodium chloride, sodium bicarbonate, and potassium chloride solution
    Product Information
    Product Type HUMAN PRESCRIPTION DRUG LABEL Item Code (Source) NDC:24571-105
    Route of Administration INTRAVENOUS DEA Schedule     
    Active Ingredient/Active Moiety
    Ingredient Name Basis of Strength Strength
    Calcium Chloride (Calcium Cation and Chloride Ion) Calcium Chloride 0.139 g  in 1 L
    Magnesium Chloride (Magnesium Cation and Chloride Ion) Magnesium Chloride 0.071 g  in 1 L
    Dextrose monohydrate (Anhydrous Dextrose) Dextrose monohydrate 1 g  in 1 L
    Lactic Acid (Lactic Acid) Lactic Acid 0.270 g  in 1 L
    Sodium Chloride (Sodium Cation and Chloride Ion) Sodium Chloride 6.137 g  in 1 L
    Sodium Bicarbonate (Sodium Cation and Bicarbonate Ion) Sodium Bicarbonate 2.936 g  in 1 L
    Potassium Chloride (Potassium Cation and Chloride Ion) Potassium Chloride 0.298 g  in 1 L
    Inactive Ingredients
    Ingredient Name Strength
    Water  
    Carbon Dioxide  
    Packaging
    # Item Code Package Description Marketing Start Date Marketing End Date
    1 NDC:24571-105-06 5 L in 1 BAG
    Marketing Information
    Marketing Category Application Number or Monograph Citation Marketing Start Date Marketing End Date
    NDA NDA021703 10/25/2006
    PRISMASOL   BGK2/3.5
    calcium chloride, magnesium chloride, dextrose monohydrate, lactic acid, sodium chloride, sodium bicarbonate, and potassium chloride solution
    Product Information
    Product Type HUMAN PRESCRIPTION DRUG LABEL Item Code (Source) NDC:24571-103
    Route of Administration INTRAVENOUS DEA Schedule     
    Active Ingredient/Active Moiety
    Ingredient Name Basis of Strength Strength
    Calcium Chloride (Calcium Cation and Chloride Ion) Calcium Chloride 0.194 g  in 1 L
    Magnesium Chloride (Magnesium Cation and Chloride Ion) Magnesium Chloride 0.048 g  in 1 L
    Dextrose monohydrate (Anhydrous Dextrose) Dextrose monohydrate 1 g  in 1 L
    Lactic Acid (Lactic Acid) Lactic Acid 0.270 g  in 1 L
    Sodium Chloride (Sodium Cation and Chloride Ion) Sodium Chloride 6.137 g  in 1 L
    Sodium Bicarbonate (Sodium Cation and Bicarbonate Ion) Sodium Bicarbonate 2.936 g  in 1 L
    Potassium Chloride (Potassium Cation and Chloride Ion) Potassium Chloride 0.149 g  in 1 L
    Inactive Ingredients
    Ingredient Name Strength
    Water  
    Carbon Dioxide  
    Packaging
    # Item Code Package Description Marketing Start Date Marketing End Date
    1 NDC:24571-103-06 5 L in 1 BAG
    Marketing Information
    Marketing Category Application Number or Monograph Citation Marketing Start Date Marketing End Date
    NDA NDA021703 10/25/2006
    PRISMASOL   BGK2/0
    magnesium chloride, dextrose monohydrate, lactic acid, sodium chloride, sodium bicarbonate, and potassium chloride solution
    Product Information
    Product Type HUMAN PRESCRIPTION DRUG LABEL Item Code (Source) NDC:24571-102
    Route of Administration INTRAVENOUS DEA Schedule     
    Active Ingredient/Active Moiety
    Ingredient Name Basis of Strength Strength
    Magnesium Chloride (Magnesium Cation and Chloride ion) Magnesium Chloride 0.048 g  in 1 L
    Dextrose monohydrate (Anhydrous Dextrose) Dextrose monohydrate 1 g  in 1 L
    Lactic Acid (Lactic Acid) Lactic Acid 0.270 g  in 1 L
    Sodium Chloride (Sodium Cation and Chloride Ion) Sodium Chloride 6.137 g  in 1 L
    Sodium Bicarbonate (Sodium Cation and Bicarbonate Ion) Sodium Bicarbonate 2.936 g  in 1 L
    Potassium Chloride (Potassium Cation and Chloride Ion) Potassium Chloride 0.149 g  in 1 L
    Inactive Ingredients
    Ingredient Name Strength
    Water  
    Carbon Dioxide  
    Packaging
    # Item Code Package Description Marketing Start Date Marketing End Date
    1 NDC:24571-102-06 5 L in 1 BAG
    Marketing Information
    Marketing Category Application Number or Monograph Citation Marketing Start Date Marketing End Date
    NDA NDA021703 10/25/2006
    PRISMASOL   B22GK4/0
    magnesium chloride, dextrose monohydrate, lactic acid, sodium chloride, sodium bicarbonate, and potassium chloride solution
    Product Information
    Product Type HUMAN PRESCRIPTION DRUG LABEL Item Code (Source) NDC:24571-111
    Route of Administration INTRAVENOUS DEA Schedule     
    Active Ingredient/Active Moiety
    Ingredient Name Basis of Strength Strength
    Magnesium Chloride (Magnesium Cation and Chloride ion) Magnesium Chloride 0.071 g  in 1 L
    Dextrose monohydrate (Anhydrous Dextrose) Dextrose monohydrate 1 g  in 1 L
    Lactic Acid (Lactic Acid) Lactic Acid 0.270 g  in 1 L
    Sodium Chloride (Sodium Cation and Chloride Ion) Sodium Chloride 6.717 g  in 1 L
    Sodium Bicarbonate (Sodium Cation and Bicarbonate Ion) Sodium Bicarbonate 2.100 g  in 1 L
    Potassium Chloride (Potassium Cation and Chloride Ion) Potassium Chloride 0.298 g  in 1 L
    Inactive Ingredients
    Ingredient Name Strength
    Water  
    Carbon Dioxide  
    Packaging
    # Item Code Package Description Marketing Start Date Marketing End Date
    1 NDC:24571-111-06 5 L in 1 BAG
    Marketing Information
    Marketing Category Application Number or Monograph Citation Marketing Start Date Marketing End Date
    NDA NDA021703 10/10/2008
    PRISMASOL   BK0/0/1.2
    magnesium chloride, lactic acid, sodium chloride, and sodium bicarbonate solution
    Product Information
    Product Type HUMAN PRESCRIPTION DRUG LABEL Item Code (Source) NDC:24571-113
    Route of Administration INTRAVENOUS DEA Schedule     
    Active Ingredient/Active Moiety
    Ingredient Name Basis of Strength Strength
    Magnesium Chloride (Magnesium Cation and Chloride ion) Magnesium Chloride 0.057 g  in 1 L
    Lactic Acid (Lactic Acid) Lactic Acid 0.270 g  in 1 L
    Sodium Chloride (Sodium Cation and Chloride Ion) Sodium Chloride 6.137 g  in 1 L
    Sodium Bicarbonate (Sodium Cation and Bicarbonate Ion) Sodium Bicarbonate 2.936 g  in 1 L
    Inactive Ingredients
    Ingredient Name Strength
    Water  
    Carbon Dioxide  
    Packaging
    # Item Code Package Description Marketing Start Date Marketing End Date
    1 NDC:24571-113-06 5 L in 1 BAG
    Marketing Information
    Marketing Category Application Number or Monograph Citation Marketing Start Date Marketing End Date
    NDA NDA021703 10/10/2008
    PRISMASOL   BGK4/0/1.2
    magnesium chloride, dextrose monohydrate, lactic acid, sodium chloride, sodium bicarbonate, and potassium chloride solution
    Product Information
    Product Type HUMAN PRESCRIPTION DRUG LABEL Item Code (Source) NDC:24571-114
    Route of Administration INTRAVENOUS DEA Schedule     
    Active Ingredient/Active Moiety
    Ingredient Name Basis of Strength Strength
    Magnesium Chloride (Magnesium Cation and Chloride ion) Magnesium Chloride 0.057 g  in 1 L
    Dextrose monohydrate (Anhydrous Dextrose) Dextrose monohydrate 1 g  in 1 L
    Lactic Acid (Lactic Acid) Lactic Acid 0.270 g  in 1 L
    Sodium Chloride (Sodium Cation and Chloride Ion) Sodium Chloride 6.137 g  in 1 L
    Sodium Bicarbonate (Sodium Cation and Bicarbonate Ion) Sodium Bicarbonate 2.936 g  in 1 L
    Potassium Chloride (Potassium Cation and Chloride Ion) Potassium Chloride 0.298 g  in 1 L
    Inactive Ingredients
    Ingredient Name Strength
    Water  
    Carbon Dioxide  
    Packaging
    # Item Code Package Description Marketing Start Date Marketing End Date
    1 NDC:24571-114-06 5 L in 1 BAG
    Marketing Information
    Marketing Category Application Number or Monograph Citation Marketing Start Date Marketing End Date
    NDA NDA021703 10/10/2008
    Labeler - Gambro Renal Products (041093923)
    Establishment
    Name Address ID/FEI Business Operations
    Gambro Renal Products 041093923 MANUFACTURE(24571-102, 24571-103, 24571-105, 24571-108, 24571-111, 24571-113, 24571-114)
    Close